| 型號 | Model | ZX-650 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 80 | 90 | 100 |
| 螺桿長徑L/D | Screw L/D ratio | - | 23.5 | 21 | 18.9 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 2614 | 3308 | 4084 |
| 射膠重量(PS) | Shot weight (PS) | g | 2405 | 3043 | 3757 |
| 射膠重量(PS) | Shot weight (PS) | oz | 85.0 | 107.5 | 132.8 |
| 螺桿行程 | Screw stroke | mm | 520 | ||
| 射膠壓力 | Injection pressure | Mpa | 220 | 174 | 141 |
| 理論射膠速率 | Injection rate | g/s | 389 | 493 | 608 |
| 最大螺桿轉速 | Max. screw speed | rpm | 120 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 6500 | ||
| 移模行程 | Toggle stroke | mm | 920 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 910*910 | ||
| 最小模厚 | Min.mold thickness | mm | 400 | ||
| 最大模厚 | Max.mold thickness | mm | 900 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 250 | ||
| 頂出力 | Hydraulic ejection force | KN | 181 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵馬達功率 | Pump motor | kw | 32+37/29.9+47.2 | ||
| 電熱量 | Heating capacity | kw | 38 | ||
| 郵箱容量 | Oil tank capacity | L | 1300 | ||
| 外形尺寸 | Machine dimensions | m | 9.7*2.2*2.6 | ||
| 理論機重 | Machine weight | Tom | 27.6 | ||
- CN