| 型號 | Model | ZX-530 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 80 | 85 | 90 |
| 螺桿長徑L/D | Screw L/D ratio | - | 22.3 | 21 | 19.8 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 2287 | 2582 | 2895 |
| 射膠重量(PS) | Shot weight (PS) | g | 2104 | 2375 | 2663 |
| 射膠重量(PS) | Shot weight (PS) | oz | 74.4 | 83.9 | 94.1 |
| 螺桿行程 | Screw stroke | mm | 455 | ||
| 射膠壓力 | Injection pressure | Mpa | 201 | 178 | 159 |
| 理論射膠速率 | Injection rate | g/s | 425 | 480 | 538 |
| 最大螺桿轉速 | Max. screw speed | rpm | 140 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 5300 | ||
| 移模行程 | Toggle stroke | mm | 850 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 860*810 | ||
| 最小模厚 | Min.mold thickness | mm | 330 | ||
| 最大模厚 | Max.mold thickness | mm | 830 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 225 | ||
| 頂出力 | Hydraulic ejection force | KN | 150 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵馬達功率 | Pump motor | kw | 55/65 | ||
| 電熱量 | Heating capacity | kw | 34.9 | ||
| 郵箱容量 | Oil tank capacity | L | 1000 | ||
| 外形尺寸 | Machine dimensions | m | 9.1*2.1*2.5 | ||
| 理論機重 | Machine weight | Tom | 20 | ||
- CN