| 型號 | Model | ZX-220 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 45 | 50 | 55 |
| 螺桿長徑L/D | Screw L/D ratio | - | 22 | 20 | 18 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 442 | 546 | 660 |
| 射膠重量(PS) | Shot weight (PS) | g | 407 | 503 | 607 |
| 射膠重量(PS) | Shot weight (PS) | oz | 12.9 | 16.0 | 19.3 |
| 螺桿行程 | Screw stroke | mm | 278 | ||
| 射膠壓力 | Injection pressure | Mpa | 207 | 168 | 139 |
| 理論射膠速率 | Injection rate | g/s | 162 | 200 | 243 |
| 最大螺桿轉速 | Max. screw speed | rpm | 210 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 2200 | ||
| 移模行程 | Toggle stroke | mm | 520 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 545*545 | ||
| 最小模厚 | Min.mold thickness | mm | 180 | ||
| 最大模厚 | Max.mold thickness | mm | 560 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 160 | ||
| 頂出力 | Hydraulic ejection force | KN | 67 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵馬達功率 | Pump motor | kw | 18.5/25.8 | ||
| 電熱量 | Heating capacity | kw | 12.6 | ||
| 郵箱容量 | Oil tank capacity | L | 300 | ||
| 外形尺寸 | Machine dimensions | m | 5.6*1.4*2.0 | ||
| 理論機重 | Machine weight | Tom | 6.3 | ||
- CN