| 型號 | Model | ZX-170 | |||
| 射膠系統 | Injection unit | 單位 Unit | A | B | C |
| 射膠系統 Injection unit | |||||
| 螺桿直徑 | Screw diameter | mm | 40 | 45 | 50 |
| 螺桿長徑L/D | Screw L/D ratio | - | 22.5 | 20 | 18 |
| 理論射膠容積 | Theoretical shot volume | cm2 | 283 | 358 | 442 |
| 射膠重量(PS) | Shot weight (PS) | g | 260 | 329 | 406 |
| 射膠重量(PS) | Shot weight (PS) | oz | 9.2 | 11.6 | 14.4 |
| 螺桿行程 | Screw stroke | mm | 225 | ||
| 射膠壓力 | Injection pressure | Mpa | 210 | 165 | 134 |
| 理論射膠速率 | Injection rate | g/s | 127 | 161 | 199 |
| 最大螺桿轉速 | Max. screw speed | rpm | 260 | ||
| 鎖模系統 Clamping Unit | |||||
| 鎖模力 | Clamping force | KN | 1700 | ||
| 移模行程 | Toggle stroke | mm | 450 | ||
| 拉桿間距 (H*V) | Space between tie bars | mm | 475*475 | ||
| 最小模厚 | Min.mold thickness | mm | 160 | ||
| 最大模厚 | Max.mold thickness | mm | 530 | ||
| 頂出行程 | Hydraulic ejection stroke | mm | 150 | ||
| 頂出力 | Hydraulic ejection force | KN | 49 | ||
| 其他 Others | |||||
| 油壓系統壓力 | Hydraulic system pressure | Mpa | 17.5 | ||
| 油泵馬達功率 | Pump motor | kw | 15/12.7 | ||
| 電熱量 | Heating capacity | kw | 10.6 | ||
| 郵箱容量 | Oil tank capacity | L | 220 | ||
| 外形尺寸 | Machine dimensions | m | 5.1*1.3*2.0 | ||
| 理論機重 | Machine weight | Tom | 4.7 | ||
- CN